Today I’m going to share how I made this DIY wood necklace stand. They are very sturdy and don’t topple over if you have heavy jewelry. I primarily use glass beads when making necklaces, and they can be pretty heavy.
The supplies you’ll need are a 4” wood circle plaque, a 5” wood square plaque, 5/8” dowel, and 1/2” cup hooks.
Cut the dowel to your desired length. Mine are 10 inches. Drill holes in the centers of your plaques to fit your dowel. Then measure, mark and drill your round plaque for the hooks. I was able to fit 10 cup hooks at 1.25” intervals. I used a dremel tool to drill the holes.
Super glue the pieces in place. At this point you can glue a wood finial to the top. I glued a plastic round flat piece to the top of mine, because there was no room in my curio to add a finial. Once the glue dries spray paint if you want or leave them natural.
Screw in your cup hooks, and hang your jewelry. That’s all there is to it.
You could attach a tiny swivel turntable to the bottom. I’ve got to find some myself.
I hope this DIY wood necklace stand will be helpful for you.